Logging – ADLINK aTCA-N700 User Manual
Page 37

aTCA-N700 SW Users Guide
31
ID
Description
Host
Test Description
Tools
DIMM_OCTEON_R
DIMM_OCTEON_L
DIMM set of
OCTEON_R
DIMM set of
OCTEON_L
NP write/read/compare
Memtester
(open
source)
NOR_FLASH_R_1
NOR_FLASH_R_2
NOR_FLASH_L_1
NOR_FLASH_L_2
NorFlash1 of
OCTEON_R
NorFlash2 of
OCTEON_R
NorFlash1 of
OCTEON_L
NorFlash2 of
OCTEON_L
NP
backup/write/read/compare/restore
data on flash(reserved area)
flashcp,
flash_erase,
cp, diff
NAND_FLASH_R_1
NAND_FLASH_R_2
NAND_FLASH_L_1
NAND_FLASH_L_2
NandFlash1 of
OCTEON_R
NandFlash2 of
OCTEON_R
NandFlash1 of
OCTEON_L
NandFlash2 of
OCTEON_L
NP
backup/write/read/compare/restore
data on flash(reserved area)
flashcp,
flash_erase,
cp, diff
6.1. Logging
Linux kernel and system S/W like ipmievd and nlnid use syslog mechanism to save
their log data to a file.
The detail syslog information is as below:
- syslog version: busybox v1.17.1 (from LMP SDK)
- syslog config (/etc/syslog.confg)
DESTINATION="file" # log destinations (buffer file remote)
MARKINT=20 # interval between --mark-- entries
[min]
REDUCE=no # reduced-size logging
BUFFERSIZE=64 # buffer: size of circular buffer [kByte]
LOGFILE=/var/NVMA/messages # file: where to log
Ö This file is located on CHIP_SSD. Refer to Table 6 1 VM Map.
REMOTE=loghost:514 # remote: where to log
FOREGROUND=no # run in foreground (don't use!)