ADLINK aTCA-N700 - Manual (Page 19)

aTCA-N700 SW Users Guide
１３
Basic RFS file name should be fsl-image-core-aTCA-N700-
20121213061548.rootfs.tar.gz
# mv fsl-rfs-core.gz fsl-image-core-aTCA-N700-20121213061548.rootfs.tar.gz
ls
contrib files
scriptsVERSION
ipmitool-1.8.11 sdk-xgs-robo-5.11.0
linux-qoriq-sdk-3.0.48-r5 target
Makefile U-Boot-2011.09
naboma README
fsl-image-core-aTCA-N700-20121213061548.rootfs.tar.gz
3.2.2.2. Build
Environment variables described below should be configured. ${QORIQ_SDK} and
${QORIQ_BSP} should be configured properly as your build environment.
export QORIQ_SDK=/home/yglim/work/QorIQ-SDK-V1.3-20121114-yocto
export QORIQ_BSP=/home/yglim/work/QorIQ-SDK-V1.3.aTCA-N700
export
QORIQ_SYSROOT=${QORIQ_SDK}/build_p2041rdb_release/tmp/sysroots/p2041rdb
export
QORIQ_TOOLCHAIN_INCLUDE=${QORIQ_SDK}/build_p2041rdb_release/tmp/sysroots/x
86_64-linux/usr/lib/ppce500mc-fsl-linux/gcc/powerpc-fsl-
linux/4.6.2/include
export QORIQ_BSP_WORK_BASE=${QORIQ_BSP}
export PATH=${QORIQ_SDK}/build_p2041rdb_release/tmp/sysroots/x86_64-
linux/usr/bin/ppce500mc-fsl-
linux:${QORIQ_SDK}/scripts:${QORIQ_SDK}/bitbake/bin/:${PATH}
export CROSS_COMPILE=powerpc-fsl-linux-
export ARCH=powerpc
export CPP="${CROSS_COMPILE}gcc -E --sysroot=$QORIQ_SYSROOT"
export LD="${CROSS_COMPILE}ld --sysroot=$QORIQ_SYSROOT"
export AR="${CROSS_COMPILE}ar"
export RANLIB="${CROSS_COMPILE}ranlib"
export CCLD="${CROSS_COMPILE}gcc -mcpu=e500mc -maix-struct-return --
sysroot=$QORIQ_SYSROOT"
export F77="${CROSS_COMPILE}g77 -mcpu=e500mc -maix-struct-return --
sysroot=$QORIQ_SYSROOT"
export CC="${CROSS_COMPILE}gcc -mcpu=e500mc -maix-struct-return --
sysroot=$QORIQ_SYSROOT"
export TOOLCHAIN_OPTIONS="--sysroot=$QORIQ_SYSROOT"
export CXX="${CROSS_COMPILE}g++ -mcpu=e500mc -maix-struct-return --
sysroot=$QORIQ_SYSROOT"