Aiwa XP-R970 - Manual (Page 8)

USING ON THE
RECHARGEABLE BATTERIES English
• Be sure to use size AA Ni-Cd 1.2 V rechargeable
batteries, which are commercially available.
• Be sure to read the instructions of the purchased
rechargeable batteries before use.
• When using on the rechargeable batteries for the first
time, charge them until the battery indicator goes out.
• Before charging the batteries, close the disc
compartment. You cannot charge the batteries while it
is opened.
1 Insert the rechargeable batteries with the O and
O marks correctly aligned.
2 Connect the AC adaptor.
® to DC 6 V jack
(D
to a wail outlet
3 Press BSTOP/OFF/CHARGE to start charging.
C-On is displayed and the battery indicator ® blinks.
Recharge the batteries until the battery indicator goes
out. After charging, disconnect the AC adaptor.
Time to recharge the batteries
Recharge the batteries when the E (red) lights. If the
unit remains in use after E (red) lights, Lo batt is displayed
and the current operation will stop.
To stop charging
Press BSTOP/OFF/CHARGE during Charging.
USING ON AC HOUSE CURRENT
Connect the supplied AC adaptor in the same way as
recharging the batteries.
During operation on AC house current, all of the battery
indicator lights.
8