2 select the desired track by pressing and ►>1, 3 press enter/memory within 4 seconds, 4 repeat steps 2 and 3 to program more tracks – Aiwa XP-R970 User Manual
Page 16: 5 press ►!! play/pause to start program play, To add tracks to the program, To erase the program, To confirm the programmed tracks, Note, Program play
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ISTOP/OFF/
CHARGE
1 ENTER/
' MEMORY
nn
n n i
uu
f U f
:
p
H6
m
; RANDOM RESUME
J f
n i
U f
RANDOM RESUME
ENTER/
MEMORY
STOP/OFF/CHARGE
J
U ' U J
iprgm
:
fiandom
resume
nn
n
_
n 'Zi
u u
f uu
'
prg
K^
random
resume
PROGRAM PLAY
English
Up to 24 tracks can be chosen for program play.
1 Press ENTER/MEMORY while in standby mode to
display jPRGMj.
2 Select the desired track by pressing and ►>1.
(D
track number
® program number
3 Press ENTER/MEMORY within 4 seconds.
If it is not pressed within 4 seconds, the track number
changes to 00. Repeat the procedure from step 2
again,
4 Repeat steps 2 and 3 to program more tracks.
5 Press ►!! PLAY/PAUSE to start program play.
To stop program play
Press BSTOP/OFF/CHARGE.
To add tracks to the program
Repeat steps 2 and 3 before playback. You can add
tracks to the end of the program.
To erase the program
Press ■STOP/OFF/CHARGE while in standby mode.
To confirm the programmed tracks
Press ENTER/MEiViORY repeatedly before playback.
The number of each programmed track will be displayed
in order of playback.
Note
• The program is also erased when the disc compartment
is opened or auto power off function cuts power.
• When the 24 tracks are programmed, P-FULL is
displayed and no more tracks may be added.
• You cannot back to previous track by pressing
during program play.
• Repeat play and random play can be performed during
program play.
16