Cisco 15600 - Manual (Page 66)

17-66
Cisco ONS 15600 Procedure Guide, R8.0
Chapter 17 DLPs E100 to E199
DLP- E183 Delete a Node from the Current Session or Login Group
Figure 17-10 Login Node Group
Step 8 Return to your originating procedure (NTP).
DLP-E183 Delete a Node from the Current Session or Login Group
Step 1 From the View menu, choose Go to Network View.
Step 2 Click the node that you want to delete.
Step 3 From the File menu, click Delete Selected Node.
After a few seconds, the node disappears from the network view map.
Step 4 Return to your originating procedure (NTP).
Purpose This task removes a node from the current CTC session or login node
group. To remove a node from a login node group that is not the current
one, see
“DLP-E187 Delete a Node from a Specified Login Node Group”
task on page 17-69 .
Tools None
Prerequisite Procedures DLP-E26 Log into CTC, page 16-33
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
LAN/WAN (Ethernet)
Three node ring Single
Laptop PC
Node 1
IP Address
192.168.106.143
Node 4
IP Address
192.168.105.119
Node 5
IP Address
192.168.104.109
Node 6
IP Address
192.168.103.199
Node 3 Node 2
IP Address
192.168.106.100
55029
Two node ring