Asus P/I-P55SP3AV - Manual (Page 56)

Software Guide
NCR SCSI BIOS & Drivers
The NCR 53C810 SCSI BIOS is recorded on the same flash
memory chip as the system BIOS. To use the on-board NCR SCSI
BIOS, the optional SC-200 SCSI controller card must be installed in
your system.
All SCSI devices you connect to your system require driver soft­
ware. The NCR SCSI BIOS directly supports SCSI hard disks under
DOS, Windows and OS/2. It also uses device drivers that are on the
DOS-format support floppy disk that comes with the SC-200 control­
ler card to support hard disks and other SCSI devices used with DOS,
Windows, Windows 95, Windows NT, Novell NetWare and OS/2.
These drivers provide higher performance than the direct BIOS sup­
port. To use these device drivers you must install them on your sys­
tem hard disk drive and add them to your system configuration
files.There is also driver support for SCSI devices used with SCO
Unix. A second, SCO Unix-format, support floppy disk has the Unix
drivers on it.
See the "Readme" files that come with the drivers for instructions
on what they are and how to use them. You can print out the Readme
files with any text editor.
3 - 2 9