Asus P/I-P55SP3AV - Manual (Page 31)

P/I-P55SP3AV User’s Manual
"STANDARD CMOS SETUP" displays a screen with a list of en­
tries. Follow the on-screen instructions to move around the screen.
Instructions at the bottom of the screen list the controls for this screen.
Use the arrow keys to move between fields, and the
(TU')/ (TD') or plus and minus keys to change the op­
tion shown in the selected field. Pressing + changes the
color scheme of the display, and exits this level and returns to
the main screen.
Modifiable fields appear in a different color. If you need infor­
mation about what changes to make, press the key. The help
menu will then give you information on the item highlighted. The
display of available memory at the lower right-hand side of the screen
functions automatically.
Date & Time
The first two lines on the screen are the date and time settings for
the system clock.
Hard Drive Type
You must enter the specifications of aU non-SCSI hard disk drives
installed in your system. MFM, ESDI and IDE hard disks all need to
have their specifications recorded here. The on-board PCI IDE con­
nectors provide two channels. Primary and Secondary for connect­
ing up to four IDE hard disks or other IDE devices, two to each chan­
nel. Only hard disks need to be entered here.
If you have any SCSI hard disks installed in your system, do not
enter their specifications here. SCSI drives are not supported directly
by the PC BIOS. If your mainboard has the SCSI controller card op­
tion, and you will use it, see the SCSI instructions that follow later in
this section. If you have some other SCSI controller, follow the instruc­
tions that came with it on how to install any required SCSI drivers.
3-4