Software guide – Asus P/I-P55SP3AV User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Software Guide
The first eleven lines after "Auto Configuration", which should
be set to "Enabled", are optimal settings for this mainboard that are
defined by the Auto Configuration feature, which configures the set
tings based on the CPU clock speed. All the other settings up to "Al
locate Memory Hole", with the exception of "Slow DRAM Refresh
(1:4)", are the recommended settings for this mainboard. You should
not change them unless you know what you are doing.
If you install SIMMs that use Slow Refresh DRAM, you should
set "Slow DRAM Refresh (1:4)" to "Enabled ".
There are two settings for "Onboard VGA Mem Size", "1MB"
and "2MB". With 2MB of display memory, higher resolutions and
with more colors can be displayed. See the documentation file for the
SIS 6205 Super VGA for more information on this.
The settings for "Onboard VGA Mem Frequency" are "Normal"
"Fast" and "Fastest". You must have 60ns or EDO system DRAM to
use the "Fastest" setting. The default setting is "Fast"
You can enable "Allocate Memory Hole" if you need it for an
expansion card that requires this feature. The documentation for the
card should have instructions regarding the required Hole Start Ad
dress and Hole Size settings.
When you are done with this section, press the
back to the main screen. The next section covers Power Management
Setup.
3-13