Asus P/I-P55SP3AV - Manual (Page 25)

P/I-P55SP3AV User’s Manual
Installing SIMMs
To install SIMMs follow these instructions:
1. The modules will only insert in a socket in one orientation. An
orientation cut-out will prevent you from inserting them the
wrong way See the figures at right.
2. Press the module edge connector into the socket at a moder­
ate angle to the board. See the figures below.
3. Press the module forward onto the socket's vertical posts, so
that the alignment pins at the top of each post go into the cir­
cular holes at each end of the module.
4. The module should click into place, as the retaining clips at
each end of the socket grip the module to secure it.
5. Repeat this procedure for each module you install.
Installing a Memory Module
Insert the SIMM
into the socket at
an angle.
Press it forward
onto the position­
ing pins.
The retaining clips
should fit over the
edge and hold the
SIMM in place.
2 - 8