To adjust ruffler for group pleating – SINGER 201 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. To increase width of pleat, move ad
justing finger
F
back toward needle
and turn adjusting screw C down
ward. To make a smaller pleat, turn
adjusting screw C upward. The dis
tance between pleats is regulated by
length of stitch.
To Adjust Ruffler for Group Pleating
To make the space between groups of
pleats, raise adjusting lever E and
move it Until projection D can be
entered in small slot indicated by
star on adjusting lever E. The rufiler
will then stop pleating and plain
stitching will be made.
Fig. 73. Pleating with the Kuffler
Fig. 74. Group Pleating with Kuffler
62