SINGER 201 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Draw material slightly back of nee
dle, lower presser bar and start to
sew.
5
. For fine gathering, turn adjusting
screw C upward and shorten stitch.
6. For full gathering, turn adjusting
screw C downward and lengthen
stitch.
To Make a Ruffle and Sew It to a Garment
In One Operation
1. Insert material to be ruffled between
two blue blades Line 2, Fig. 66.
RUFFLING
MATERIAL^ 2
GARMENT-^
2, Place material to which ruffle is to
be attached under separator blade
Line 1, Fig. 66.
3
. Proceed same as for plain gathering.
To Make a Ruffle and Attach It
With a Facing in One Operation
1. Insert material to be ruffled between
two blue blades Line 2, Fig. 68.
Fig. 66. Correct Positions for Materials
Fig. 67. Making a Ruffle and
Attaching It In One Operation
59