SINGER 201 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Skipping of stitches might be caused
by;
1. Incorrect setting of needle. See
page 8.
2. Needle blunt or bent.
3. Needle too small for thread. See
page 9.
4. Needle rubbing presser foot.
Gathering or Puckering of material
might be caused by:
1. Failure to use crisp lawn or organdy
backing when stitching on sheer
materials.
2. Excessive needle and bobbin thread
tensions.
NOTE: If machine runs heavily after
standing idle for a long period, apply
a few drops of kerosene at all oil
ing points, run the machine for a few
minutes, then wipe clean and apply
SINGER* Oil as described on pages
33 to 37.
SINGER
Needles should be used
in
SINGER
Machines.
These Needles and their Containers
are marked with the
Company’s Trade Mark“ SINGER ”1
Needles in Containers marked
“FOR SINGER MACHINES”
are NOT
SINGER
made Needles.
29