Ttf iwavfi tlii – SINGER 201 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ttf IWaVfi Tlii
Raise take-up lever 5, Fig. 8 to its
highest point. Draw the bed slide
toward the left, in the bed of machine.
Lift out bobbin with thumb and fore
finger of left hand as shown in Fig. 10.
See Fig. 11
1. Place bobbin on spindle with pin of
spindle entering slot in right side of
bobbin.
2. Lock bobbin in place bv pressing
bobbin winder down until latch N,
Fig. 11 engages.
3- Hold hand wheel L and loosen large
knurled screw on hand wheel by turning
it over toward you.
4. Place spool of thread on spool pin 1.
Draw thread under and between tension
discs 2. Lead thread up through hole in
bobbin 3 from the inside.
5. Hold end of thread as shown in
Fig. 11 and press controller as for sew
ing. Continue to hold end of thread
until it breaks off.
12