To shirr with gathering foot – SINGER 201 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. For succeeding tucks, fold material
the desired distance from previous
tuck, running the fold lengthwise
over a straight edge, then crease
folds.
3
. Insert creased folds in slot 1, Fig. 54
and adjust edge-stitcher to right or
left for the desired width of tuck.
Use a light tension, short stitch and
fine thread and needle.
To Shirr with Gathering Foot
1. Fasten gathering foot to presser bar
in place of presser foot.
2. Place material under gathering foot
and stitch in usual way.
3
. The fullness of shirring or amount of
gathering is regulated by length of
stitch. A longer stitch increases full
ness of gathers.
Fig. 62. Shirring with Gathering Foot
56