To bind outside curves, To bind inside curves – SINGER 201 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Bind Outside Curves
Allow edge to be bound to pass freely
through scroll without crowding against
scroll wall. The material must be guided
from back of binder and to left, permit
ting unfinished edges to swing naturally
into scroll of binder.
Never pull binding while it is being fed
through binder, as this may stretch
binding, making it too narrow to stitch
or to turn in the edges.
When binding curves, turn material
only as fast as machine sews.
Do not push material in too fast as this
will pucker edge.
Do not stretch material as this will dis
tort edge so that curve will not have
proper shape when finished.
If stitching does not catch edge of bind
ing, adjust scroll slightly to the left.
To Bind Inside Curves
When binding an inside curve, straighten
out edge of material while feeding it
into binder, being careful not to stretch
material.
Fig. 52. Binding an Outside Curve
50