To pipe a ruffle – SINGER 201 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Place material to which ruffle is to
be attached under separator blade
Line 1, Fig. 68.
3. Place facing material over upper blue
blade Line 4, Fig* 68.
Fig. 68. Correct Positions for lAaterials
4. It facing is to be on right side of .gar
ment, place wrong sides of garment
and ruffle together.
5. If facing is to be on wrong side, place
right sides of garment and ruffle
together.
To Pipe a Ruffle
1. Insert material to be ruffled between
two blue blades Line 3, Fig. 70.
Fig. 69. Making a Ruffle and Attaching
It With a Facing In One Operation
This material must not exceed 1 \i
inches in width.
IQI
GARMENT;,^
RUFFLING
^
MATERIAL
Fig. 70, Correct Positions for Materials
60