SINGER 201 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When tension has been correctly set for
average sewing, note number at indi
cator line Z. This setting may be
quickly regained should the tension be
altered for special work or a change in
size of thread.
In the unbalanced tensions shown at top
of Fig. 2 3 caused by too heavy tension
on needle thread, the needle thread lies
straight along top side of material.
In the unbalanced tensions shown at
top of Fig. 24, caused by too light ten
sion bn needle thread, the bobbin
thread lies straight along under side of
material.
If perfect stitching cannot be obtained
by regulating the needle thread tension,
check for minimum tension at “0”
position and
if
necessary adjust as in
structed on page 2 7. Then regulate
bobbin thread tension as instructed on
pages 24 and 2 5.
Fig. 24
23