SINGER 201 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Allow tension discs to control flow of
thread. Do not guide or hold thread
when winding bobbin.
The bobbin winder will stop automati
cally when the bobbin is filled.
Remove bobbin from spindle and tighten
the large knurled screw on the hand
wheel L.
If pressure of bobbin winder pulley
against hub of hand wheel is insufficient
for winding the bobbin, press down
bobbin winder until latch N, Figs. 11
and 12 drops and holds it in position.
Fig. 11. Winding the Bobbin
13