To apply folded bias tape or military braid, To stitch a wide hem – SINGER 201 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Apply Folded Bias Tape
or Military Braid
1. Place garment under edge-stitcher
and tape in slot 1 or 4, Fig. 54.
2. To make square corners, sew to turn
ing point, remove tape from attach
ment, form corner by hand, replace
tape and continue stitching. See
Fig. 58.
3. To space two or more parallel rows,
mark material with a guide line,
using a crease, chalk or basting
thread.
To Stitch a Wide Hem
1. A wide hem may be stitched evenly
on sheets, pillow slips, etc., with
edge-stitcher after hem has been
measured and edge turned.
2. Insert edge in slot 5, Fig. 54, and
adjust lug D2 to stitch as close to
edge as desired.
Fig. 59. Making a Wide Hem
Fig. 58. Applying Bias Folded Tape
54