SINGER 201 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Raise presser foot F by means of presser bar lifter
G to prevent injury to the foot F and feed
Place a piece of cloth under presser foot and let
the foot down upon it.
Turn on electric current and, if the combination
knee and foot controller is installed as a knee
1
controller, press coritroller to the right,, or, if
controller is placed on the floor to be used as a
foot controller, pre?s down on pedal of con
troller. As the pressure on controller is increased,
the speed of machine is increased, the speed being
controlled entirely by amount of pressure on con
troller. Operate machine in this way, without
being threaded, until you have become accus
tomed to guiding the material and operating the
controller.
Si,,.....
,
Fig.
7
. Front View of Machine
10