Tuffy Security 304 - Manual (Page 5)

Page 5 of 7 – 10/17/2013
11. Slide the enclosure back into the brackets and into final position with the back of the enclosure ¼” beyond the forward
surfaces of the brackets(See Figure 4).
FIGURE 4
12. Attach the enclosure to the brackets using (8) #12.2 Hex Bolts, (16) #12.3 Flat Washers, and (8) #12.4 Nylock Hex
Nuts. Leaving them loose for enclosure flexibility until all are in place, then tightening to approx. 15 ft-lb(See Figure 5)
FIGURE 5