Tuffy Security 219 User Manual
Command center modular console line, Assembly instructions, Item # - 219-__-___ accessory face plates

Tuffy Security Products,
www.tuffyproducts.com
, (970) 564-1762 Page 1 of 2 - 12/01/2009
Command Center Modular Console Line
ITEM # - 219-__-___ Accessory Face Plates
See TuffyProducts.com for all console applications and related products
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
#1 - (1) 219-__-___ ACCESSORY FACEPLATE
#2 - (2) 195-__-_ SPACERS
(Note: Your face plate may differ from the one shown above depending on number and type of accessories to be
mounted. One or more power ports may be included, as well as one or more switches. If a custom faceplate was
ordered, the cutouts will match the accessories that you provided. If a blank faceplate was ordered, there will be
no included accessories or cutouts. )
SHIPPING PACKAGE CHECKLIST
#3 - (4) 10-32X1/2 HEX HEAD SCREW
#4 - (4) 10-32 U-NUTS
TOOLS NEEDED
•
3mm hex key or 3mm bit and cordless driver with clutch
ASSEMBLY INSTRUCTIONS:
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
1. The 219 Accessory Faceplate kits require a Tuffy Security Products Communications Console to mount to. Please see
www.tuffyproducts.com
for the complete Command Center Console line.
2. IMPORTANT! Make sure the vehicle is parked on a flat surface, placed in park, and the emergency brake is activated.