Tuffy Security 862 User Manual
Attention, Installation instructions
Page 1 of 2 - 05/28/2008 – Rev05192008
INSTALLATION INSTRUCTIONS
POWER OUTLET #862
Call (970) 564-1762 for Technical Support
PARTS CHECKLIST
#1 Outlet
#10 Crimp cap
#9 Tap-in connector
#8 Fuse
#7 Fuse holder
#4 – (2) Female terminal
#12 Ring terminal
#6 Black Ground Wire
#5 Red Hot wire
#11 – (2) Zip ties
#2 – (2) 8-32 X ½” FLAT HEAD
#3 – (2) 8-32 HEXWASHER NUT
TOOLS NEEDED
• Phillips head screw driver (Short)
• 11/32” Nut-driver and/or wrench
• Electrical wire cutting, stripping, and crimping tool (For 12 volt outlet installation)
• Electrical volt meter (For 12 volt outlet installation)
ATTENTION:
This installation should be done by a skilled professional. Tuffy does not warranty any
electrical components or damage caused by them. Improper installation can cause
damage to the vehicle and/or any electronics plugged into the outlet. Make sure there is
no power to the wiring when installing.