Tuffy Security 046 - Manual

Page 1 of 3 - 1/28/2008 – Rev122006
INSTALLATION INSTRUCTIONS
REAR CARGO SECURITY LOCK-BOX #046
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
(2) 8MM METRIC BOLTS
(2) 5/16 WASHERS
(2) 3/8 X 1 BOLTS
(4) 3/8 WASHERS (2) 3/8 NYLOCK NUTS
(2) 7/16 x 1 ¼ BOLTS
(4) 7/16 WASHERS (2) 7/16 NYLOCK NUTS
FINGER PULL LEVER
RUBBER SEAL
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
ATTENTION!
• In some vehicles as a result of mounting the box on an uneven surface the lid may be offset and will not close
properly after the box is bolted down. To correct this, a spacer (not included) will need to be placed under the corner
of the box to compensate for the uneven mounting surface.
• It is recommended to use silicone sealant in any drilled holes to prevent any future rusting.