Toa S-D7802 - Manual (Page 7)

7
6. NOmENClATURE AND FUNCTIONS
[Front Panel]
[Front monitoring Section]
1. Power switch
Press this switch to turn the power on, and press it
again to turn off the power.
2. Power indicator
Lit when the power is on.
3. Antenna mounting kit mounting holes
For more information, see p. 19, "Mounting the
Antenna on the Receiver's Front Panel."
4. Operation menu display
Shows results of operation key settings.
For more information, see p. 11, "Settings and
Confirmation Procedures."
5. Operation keys
Change menus in the operation menu display, as
well as receiver setting items.
For more information, see p. 11, "Settings and
Confirmation Procedures."
2
3 4 5 3 1
Unit Display Section Function Display Section Front Monitoring Section
6
7
8
9
OUTPUT
MIN MAX
VOL
1 − UNIT − 2
PHONES
UNIT 1 UNIT 2
6. Headphones output unit selector key [UNIT1,
UNIT 2]
For more information, see p. 20, “Monitoring
with Headphones.”
7. Headphones socket [PHONES]
Allows received audio to be heard through
connected headphones.
For more information, see p. 20, “Monitoring
with Headphones.”
8. Audio output level indicator [OUTPUT]
Lights when the received audio signal level exceeds
the specified value (–36 dBFS).
Note: 0 dBFs is full scale output level.
9. Headphones volume control [vOl]
Adjusts the headphones output volume.
[Function Display Section]
10
11
12
13 14 15
10. Antenna attenuator level indicator [ANT ATT
A, ANT ATT B]
Displays the set attenuator level in three
increments (“0,” “–10” and “–20dB”).
For normal operation, leave attenuator in “0”
position.
11. RF cascade indicator [RF CASCADE]
Lit when the antenna cascade outputs are
connected to antenna distributors or antenna
input terminals.
For more information, see p. 17, “Sharing an
Antenna between 2 Receivers.”
Note
The antenna cascade output function is provided
with the S5-ADU and S-D7802.