Specifications, Accessories – Toa S-D7802 User Manual
Page 36
36
17. SPECIFICATIONS
Power Source
100 – 240 V AC, 50/60Hz
Power Consumption
500 mA or less
Frequency Range
606 – 638 MHz
Antenna Input
1 input, BNC jack, 50 Ω, 2 channels
Antenna power supply: 9 V DC, 90 mA (max.)
Antenna Cascade Output
1 output, BNC jack, 50 Ω, 2 channels
Receiving Sensitivity
30 dBμV or less (Bit error rate: 1E-5 or less)
Antenna Input Attenuator
0 dB/−10 dB/−20 dB switchable
Modulation System
PLL synthesized
Receiving System
Double Superheterodyne, digital diversity system
Frequency Response
20 Hz – 15 kHz
D/A Converter Resolution
24 bits, 48 kHz sampling
Coding System
ADPCM (TRANTEC original)
Audio Latency
4 ms or less
(when using in conjunction with the optional S-D7200 or S-D7300)
Analog Audio Output Connector XLR 3-32 equivalent: Balanced output
2-pole jack:
Unbalanced output
Analog Audio Maximum Output
Level
Balanced output:
20 dB*
1
or more (LINE)/0 dB*
1
or more (MIC) switchable
Unbalanced output:
14 dB*
1
or more (LINE)/−6 dB*
1
or more (MIC) switchable
Dynamic Range (AF Circuit)
110 dB
or more (A-weighted)
Total Harmonic Distortion
0.05%
or less (at 30 dBμV, 1 kHz, −10 dBFS*
2
, A-weighted)
Maximum Mixing Output Level
10 dB*
1
or more, unbalanced, 2-conductor phone jack
Mixing Input
−10 dB*
1
, unbalanced, 2-conductor phone jack
Headphones Output
500 mW, 16 Ω, 3-conductor phone jack
AES/EBU Output
24-bit output (internal 48 kHz, external word clock sync)
XLR 3-32 equivalent, 110 Ω, balanced output
Word Clock Input
32 – 96 kHz, BNC jack, 75 Ω terminated/Open switchable
Transmitter Information Display Remaining battery level, microphone gain setting information, and other
information
ID Selectable
10 patterns
Network
Ethernet, RJ-45
Operating Temperature
−10 to +50ºC
Operating Humidity
30% to 85% RH (no condensation)
Finish
Panel: Aluminum, hairline, black, alumite
Case: Surface-treated steel plate, black, paint
Dimensions
482 (w) x 44 (h) x 362.6 (d) mm
Weight
4.1 kg
*
1
0 dB = 0.775 V, *
2
0 dBFS = 24-bit full scale output
Note: The design and specifications are subject to change without notice for improvement.
Accessories
AC power cord (2 m) ....................................... 1
BNC plug cord (50 cm) ................................... 1
Front mount cord with BNC plug (65 cm) ....... 2
Direct mount antenna ..................................... 2
Phone plug cord (1 m) .................................... 1
CD (Monitoring software) ............................... 1
Rack mounting screw 5 x 12 .......................... 4
Rack mounting washer ................................... 4
Rubber foot ..................................................... 4
Ferrite clamp .................................................. 1