Toa S-D7802 - Manual (Page 11)

11
7. SETTINGS AND CONFIRmATION PROCEDURES
7.1 Receiver Setting Operation
Two operation modes are available for receiver settings:
• Local mode: Change and confirm settings using the receiver's LCD screen and keys.
• Remote mode: Change and confirm settings using dedicated software installed on a PC connected to the
receiver via a network.
Explained herein is a Local mode. For the Remote mode, refer to the S-D7000 Series Monitoring Software
instruction manual contained in the supplied CD.
7.2. Setting Screen menu Configuration
Receiver operation mode settings Remote See p. 27.
Local
Receiving frequency settings Unit 1 Group 0 – 9, A – F See p. 13.
Channel 0 – 9, A – F
Unit 2 Group 0 – 9, A – F
Channel 0 – 9, A – F
ID setting Unit 1 0 – 9 See p. 13.
Unit 2 0 – 9
Peripheral settings Antenna attenuator 0, −10, −20 See p. 24.
Word clock Internal See p. 25.
External
Transmitter condition check See p. 29.
Utility settings Channel scan Group See p. 23.
ID ON/OFF setting Unit 1 See p. 22.
Unit 2
User name settings Unit 1 See p. 31.
Unit 2
Receiver setting data Global save 0 – 2 See p. 30.
Global load 0 – 2
Network settings IP address check See p. 28.
Receiver name check See p. 29.
MAC address check See p. 28.
Monitor unit setting 1, 2, 1+2 See p. 28.