Toa S-D7802 - Manual (Page 10)

10
35. mixing output jack
Phone jack, –10 dB*, unbalanced (at reference
output).
Connect to the Line (Auxiliary) input terminal of
the connected device.
Outputs audio signals from Unit 1, Unit 2, and
mixing input after they are all mixed.
Interlocks with the front-mounted Headphone
output unit selector key.
36. Unit 2 audio output jack (unbalanced)
Phone jack.
Unbalanced independent audio output of the Unit 2.
Connect to the microphone input terminal or line
input terminal of the connected device.
37. Unit 1 audio output jack (Unbalanced)
Phone jack.
Unbalanced independent audio output of the Unit 1.
Connect to the microphone input terminal or line
input terminal of the connected device.
38. A antenna cascade output connector
BNC jack.
Connect to the second S-D7802 Diversity wireless
receiver's A antenna input jack.
Tip
You do not need to connect the termination
resistor to the idle antenna connector.
For more information, see p. 17, "Sharing an
Antenna between 2 Receivers."
39. A antenna input connector
BNC jack.
Connects to a wireless antenna.
Supplies DC power to the antenna. (9 V DC, Max.
90 mA)
Up to 2 YW-7000 Antenna boosters (optional) can
be connected to the antenna input jack.
Note
Never connect a termination resistor to the idle
antenna input connector. Doing so short-circuits
the supply power to the antenna
* 0 dB = 0.775 V