Toa S-D7802 - Manual (Page 17)

17
9.2. Sharing an Antenna between 2 Receivers
After connecting an antenna to one receiver, connect that receiver's antenna output (CASCADE OUT) to
another receiver's antenna input (ANTENNA IN) with a BNC cable.
When an antenna is shared, the RF Cascade indicator lights on the receiver where the antenna is mounted.
This application example serves to configure the system where up to 4 microphones are used in a relatively
small area.
Notes
• Use the supplied antenna, or optional YW-7520 or YW-7570.
Be sure to connect one each of antennas to A and B antenna input connectors.
• Up to 2 receivers can be cascaded as shown below because the antenna cascade output signal will attenuate
as more receivers are cascaded.
The antenna cascade connection can not be used when antennas are to be shared by 3 or more receivers.
100 – 240V 500mA 50/60Hz
100 – 240V 500mA 50/60Hz
YW-7520 YW-7570
S-D7802
S-D7802
YW-7520 YW-7570