Toa S-D7802 - Manual (Page 31)

31
[Global load]
Step 1. Display "8 STORE SETTING" in the Operation menu display.
Step 2. Press the Right key to go to SETTING MENU.
Step 3. Select "LOAD SETTING" using the Up and Down keys.
Step 4. Press the Right key to go to the setting screen.
Step 5. Select one of the Save pattern No. 1
through 3 using the Up and Down keys.
Step 6. Press the SET key.
The "YES" display screen will appear.
Step 7. Press the SET key again.
Reception setting information is
globally loaded.
L O A D S E T T I N G
F R O M S E T [ 1 ]
L O A D F R O M 1 ?
[ Y E S ]
N O W L O A D I N G
L O A D C O M P L E T E !
13.3. User Name Settings
Sets each module unit's name.
13.3.1. Setting procedures (when saving)
Step 1. Display "7 USER NAME" in the Operation menu display.
Step 2. Press the Right key to go to Unit selection.
Step 3. Select the unit using the Up and Down
keys.
Step 4. Press the Right key to go to Input mode.
Step 5. Move the cursor to the desired entry
position using the Left and Right keys,
then enter the character using the Up
and Down keys.
Step 6. Press the SET key.
Entry is confirmed.
< U S E R 1 > N A M E
V O X M I C 1
[ U S E R 1 N A M E ]
V O X M I C 1
[ U S E R 1 N A M E ]
V O X M I C 2
< U S E R 1 > N A M E
V O X M I C 2