Toa S-D7802 - Manual (Page 29)

29
12.6. Receiver Name check
Checks the receiver's name.
12.6.1. Setting procedures
Step 1. Display "9 NETWORK" in the Operation menu display.
Step 2. Press the Right key to go to NETWORK MENU.
Step 3. Select "RECEIVER NAME" using the
Up and Down keys, then press the
Right key.
The Receiver name is displayed.
13. TIPS ON USE
13.1. Transmission Information Check of the Digital wireless microphone
In the S-D7000 series Digital wireless microphone system, the wireless microphone transmits the following
information together with audio signal in real time to the receiver: microphone type (handheld or belt pack
microphone), remaining battery level, open/close status of the battery case, and microphone gain setting. Such
information can be displayed at the receiver.
The Battery indicator indicates the remaining battery level information.
Other information can be checked through menu operation.
Such information can also be checked using the dedicated monitoring software installed in a PC when the
receiver and PC are connected via Ethernet.
13.1.1 Setting procedures
Step 1. Display "5 TX STATUS" in the Operation menu display.
Step 2. Press the Right key to go to Display mode.
Information of the microphones assigned to the units 1 and 2 is displayed.
Display information
Battery case Open/Close information OPN: The battery case is open.
CLS: The battery case is closed.
Microphone type information
HD: Handheld microphone
BT: Belt pack microphone
Gain information Setting values of the digital wireless microphone
U 1 : C L S B T - 2 7 d B
U 2 : O P N H D - 1 5 d B
R E C E I V E R N A M E
2 N D F L O O R