TeeJet LH665 VRT - Manual (Page 68)

I NDEX LH 665 VRT O PERATORS MANUAL
12.2 LH A GRO
INDEX
-A-
Actual rate..........................................3.10
Actual rate scale factor ........................4.4
Actual rate units ...................................4.5
Advanced settings ...............................4.5
App. rate config....................................4.6
Application distance from GPS Antenna
.............................................................4.4
Application rate control setup...............4.6
Application rate files...........................11.9
Area ...................................................3.10
Area Calibration .................................4.12
Area override switch ............................2.3
Area per hour.....................................3.11
Arrow keys ...........................................2.4
Automatically creating log files for SRAM
data cards ..........................................11.6
Automatically creating new log files for
FLASH data cards .............................11.5
-B-
Beacon mode (Add-On GPS only).......9.6
Beacon setup (Add-On GPS only) .......9.6
Beacon/Sat. frequency.........................9.4
Boundary map ...................................4.11
Box cal.................................................4.9
-C-
Changing fields ....................................3.7
Changing loads....................................3.7
Changing the log file ..........................11.9
Channel 0/1 Frequency (Add-On GPS
only).....................................................9.6
Clear loads.........................................4.10
Compass heading..............................3.12
Controller make/model.........................4.3
Controller time delay............................4.5
Copy to card ......................................11.7
Copy to file.........................................11.8
Coverage map ...................................4.11
Create file ..........................................11.9
Creating a controller for application
control..................................................4.3
-D-
Data card information.........................3.13
Data card types..................................11.5
Data cards .........................................11.4
Data logging.........................................3.7
Data per field .......................................3.2
Date .....................................................4.9
Date/Time ..........................................3.13
Defining fields before start ...................3.4
Diagnostics ........................................3.15
Differential SNR ...................................9.4
Differential status .................................9.4
Distance.............................................3.11
-E-
Elevation (height above sea level) .......9.3
Encode.................................................4.2
Encode menus/Values.........................4.2
EPROM Language.............................4.10
Erase all.............................................11.8
Erase file............................................11.8
Erase memory ...................................4.10
-F-
Field boundary files............................11.9
Field marker input ..............................4.10
Field name .........................................3.13
File names .........................................11.9
File options ........................................11.8
Forward speed calibration..................4.13