TeeJet LH665 VRT - Manual (Page 44)

A PPLICATION CONTROL , ENCODE & CALIBRATION LH 665 VRT O PERATORS MANUAL
4.10 LH A GRO
GPS Check Sum:
If the DGPS receiver sends a “check sum” then set this encodement to ON. The
standard setting is OFF.
Field marker input:
Select whether the internal markers are used (select INTERNAL) or whether an
external marking module is used (select EXTERNAL).
EPROM language:
Select the operating language of the LH 665.
MEMORY SETUP
Step Key Procedure
1
MEMORY
Press the MEMORY key to display this screen:
EXIT
CLEAR
LOAD
ERASE
MEMORY
PRINT
SUMMARY
MEMORY SETUP
Active Field/Load:
Field: F9: HILTON
Load: PRODUCT 1 L10:
Fields 119
Loads 243
Loads (All Modes) 245
Available memory 378628 bytes
% Memory used 28 %
2
CLEAR
LOAD
Pressing this key allows selection of a load to be deleted.
Pressing the CLEAR ALL key will delete all loads in
APPLICATION RATE mode without deleting the field
names.
3
ERASE
MEMORY
Pressing this key removes all fields and loads from the
memory. All field names will be erased; the kg-calibration for
the individual crop types will be erased.
4
PRINT
SUMMARY
Not available in this version.
5
EXIT
To leave this menu, press the EXIT key.