TeeJet LH665 VRT - Manual (Page 18)

A PPLICATION CONTROL , OPERATION LH 665 VRT O PERATORS MANUAL
3.2 LH A GRO
IMPORTANT
Correct encodement and calibration of the LH 665 are essential before
correct operation of the following functions.
The procedure for encoding and calibration of the LH 665 are described in the
respective chapters in this operator’s manual.
THE APPLICATION CONTROL PROGRAM
The most important functions for application control are:
Application rates
• Target
rate
• Actual rate
• Average actual rate
• Total
units
Forward speed
• Kilometres per hour
• Distance
Other functions
• Date
and time
• Map zoom
Area
• Area covered for the field
• Actual working width
• Hectare per hour
DATA PER FIELD
All application control data is connected to a field number, this is to ease data
registration.
• Each field has a number and can be given a name.
• Each field can use only one application task.
• Each field can be split into loads.
• Each load can be, e.g. a spreader full, a hopper load, etc.
• Each load has a number and can be given a name.
• The sum of, i.e. the area, the distance, etc. for each individual
load, is equal to the total for the field.