TeeJet LH665 VRT - Manual (Page 58)

D ATA CARDS & DATA MANAGEMENT LH 665 VRT O PERATORS MANUAL
11.2 LH A GRO
DATA CARDS
This chapter discusses all data card related functions found in the LH 665. This
chapter is for all operating modes as all data card functions are almost the same
for all operating modes
DATA CARD SET-UP
The LH 665 must be set-up to log positional data to a data card.
Step Key Procedure
1 Press the MENU key until the following menu selection keys
are shown at the bottom of the display (screen section C):
CAL. SETUP DIAG
2 SETUP
Press the SETUP key.
3 Page through the available encodement menus using the
ARROW keys:
APP RATE
CONFIG
MARKS LOAD CARD
CONSOLE MEMORY MAP GPS
4
CARD
Press the CARD key to display this screen:
EXIT EDIT
COPY TO
CARD
SHOW ALL
FILES
CARD SETUP
Logging device MEMORY CARD
Logging interval 2 seconds
Log file 99010501.yld
Highlight the setting to be changed using the ARROW
UP/DOWN keys.
5
EDIT
When the setting is highlighted press the EDIT key.
6
ACCEPT
Alter the setting using the ARROW UP/DOWN keys and
press the ACCEPT key.
7
EXIT
When all settings have been encoded press the EXIT key.