TeeJet LH665 VRT - Manual (Page 19)

LH 665 VRT O PERATORS MANUAL A PPLICATION CONTROL , OPERATION
LH A GRO 3.3
OPERATION
SETTING THE LH 665 TO APPLICATION CONTROL
The LH 665 may need setting up for application control. The following procedure
sets the computers “operating mode”.
Step Key Procedure
1 Press the MENU key until the following menu selection keys
appear at the bottom of the display (screen section C):
CAL SETUP DIAG
2 SETUP Press the SETUP key to display the following:
SWATH MARKS CROP CARD
3 Press the lower ARROW keys until the following is displayed:
LOAD VEHICLE MEMORY CONSOLE
4
CONSOLE
Press the MONITOR key and this screen is displayed:
EXIT EDIT
CONSOLE SETUP
Operating Mode APPLICATION RATE
Day/Month/Year 1/06/1999
Time 11:23
Serial Number 9800085
Box cal. 774
Voltage cal. 487
GPS Check Sum OFF
Field Marker input INTERNAL
Use the ARROW UP/DOWN keys to highlight Operating
Mode.
5
EDIT
Press the EDIT key and select APPLICATION RATE
using the ARROW UP/DOWN keys.
6
ACCEPT
When APPLICATION RATE has been selected under
Operating Mode press the ACCEPT key.