TeeJet LH665 VRT - Manual (Page 61)

LH 665 VRT O PERATORS MANUAL D ATA CARDS & DATA MANAGEMENT
LH A GRO 11.5
Step Key Procedure
6 Select the data card size using the ARROW UP/DOWN keys.
7
ACCEPT
Press the ACCEPT key.
DATA CARD TYPES
There are two data card types that are compatible with the LH 665:
•
LH Flash data card 32MB (LH no. 904-665RC). This data card is supplied
with the LH 665.
• LH SRAM data card 1MB (LH no. 904-565).
The main difference is that the LH 665 can store many different log files on LH
Flash data cards, but only one log file on LH SRAM data cards.
A new log file is created each day when a LH Flash data card is used. If however a
LH SRAM data card is used, data will be stored in the same file until there is no
more room on the data card.
AUTOMATICALLY CREATING NEW LOG FILES FOR FLASH DATA
CARDS
The following procedure is for when the LH 665 is switched on for the first time
each day:
Step Key Procedure
1 Switch the LH 665 on with the card inserted.
2 After starting the following is displayed:
ACCEPT CANCEL
CREATE LOG FILE
A new log file must be created
for 22/4/1999 to log data
New log file: 99042201.YLD
3
ACCEPT
Pressing the ACCEPT key will create a new log file for the
day.