TeeJet LH665 VRT - Manual (Page 24)

A PPLICATION CONTROL , OPERATION LH 665 VRT O PERATORS MANUAL
3.8 LH A GRO
MARKERS
The internal markers in the LH 665 are used together with DGPS positions to mark
positions in the field whilst working, i.e. wet areas, weeds, stones, etc.
Step Key Procedure
1 Press the MENU key until the following menu selections keys
are displayed at the bottom of the screen (screen section C):
FIELD LOAD SHOW MAP OPTIONS
2 MARKS Pressing the MARKS key displays the following:
MARK 1 MARK 2 MARK 3 MARK 4
The marker name and type can be altered, and the
procedure for this is described in the ENCODE chapter under
MARKER SETUP.
CONTINUOUS marking is started and stopped by pressing
the key.
SPOT marking is started by pressing the key and stops
automatically after a few seconds.
The LH 665 beeps and the marker being used flashes when
one or more markers are being used.