beautypg.com

Section 8 ske-v70 module installation, Mounting -1, See section 8 for m – SilentKnight SKE-450 Voice Evacuation Control Panel User Manual

Page 61: N section 8, 1 mounting

background image

151267

8-1

Section 8
SKE-V70 Module Installation

The SKE-V70 converts the speaker circuit voltage from 25 Vrms to 70.7 Vrms. The following
sections describe how to install and wire the SKE-V70.

8.1 Mounting

Follow these steps to install the SKE-V70 module into the main control panel cabinet:

1. Unlock and open the cabinet door.

2. Remove the two cover plate retaining screws, then open the control panel cover plate. See

Figure 8-1.

Figure 8-1 View of Cabinet With Cover Plate in Place

Note: The control panel cover plate can be remove by removing the Hinge screw.

3. Run all wire needed to install the system at this time. See Section 8.2.

Control Panel

Cover Plate

Control Panel

Cover Plate

Zone Splitter
Access Plate

Retaining Screws

Hinge Screw