SilentKnight SKE-450 Voice Evacuation Control Panel - Manual (Page 36)

SKE-Series Voice Evacuation System Installation/Operation Manual
5-2 151267
5.1.1 Terminal Strip 1
This section describes what the terminal connections of terminal strip 1 are used for.
5.1.2 Terminal Strip 2
This section describes what the terminal connections of terminal strip 2 are used for.
5.1.3 Terminal Strip 3
This section describes what the terminal connections of terminal strip 3 are used for.
Terminal
Number
Name Description
1 +24 VDC Positive 24 VDC in or out.
2 GND Ground
3
4
Not Used
5
6
7
8 GND Ground
Terminal
Number
Name Description
9 GND Ground
10 Alarm Active Signal input from main DMR to indicate when an Alarm occurs. Active low.
11 Alarm Select 1
Used by FACP for automatic alarm control of zone outputs. Active low.
12 Alarm Select 2
13 Alarm Select 3
14 Alarm Select 4
15 GND Ground
16 Trouble Out Trouble output, active low.
Terminal
Number
Name Description
17 GND Ground
18 Not Used.
19
Not Used.
20
21
22
23 GND Ground
24 Select All Not Used.