LAARS NeoTherm NTV (Sizes 150–850 MBTU/h) - Install and Operating Manual - Manual (Page 36)

Page 32 LAARS Heating Systems
quick Start This menu gives you an easy way to check or change the most common set-
tings on the unit:
• CH setpoint
• DHW setpoint
• Outdoor reset
• Low water temperature
• Maximum outdoor temperature
• Minimum outdoor temperature
• Adjustable high limit
• Adjustable low limit
See Section 8B for more information.
Login If you want to change a setup value or function, and the system requires a
password, you can enter it here. See the section on “Login Display.”
Test These parameters let you turn the burner on and off, and control the fan and
pump speeds. See the section on “Test Menu.”
Advanced Setup The sub-menus listed here allow you to set up most of the functions on the
controller. In the section on “Advanced Setup” we will explain how to reach all
of the setup functions. (For many of these functions, the system will require a
password before it will allow you to make changes.)
Diagnostics Use the Diagnostics to check the status of the sensors and the digital inputs
and outputs. The system also records a history of lockouts and alarms. See
the section on “Diagnostics.”
Display Setup You can use this option to adjust the contrast of the display or change the
items which appear at the top of the Home display. See the section on
Display Setup.
Table 11 - Functions on Info/ Install Menu