KGUARD Security TC801 - Manual (Page 72)

ENGLISH
Chapter 5: KGUARD Web Client
72
DVR User’s Manual
3
On Type, select PPPOE.
4
Specify the Media Port, Web Port, DNS1, DNS2 (if necessary).
5
Enter the User Name and Password.
Note:
Obtain these information from your network administrator or your Internet Service Provider (ISP).
6
Set UPnP to On if you are using Universal Plug and Play (UPnP) devices.
7
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications or close the screen, click
.
Setting Up TCP/IP - DHCP
If your network uses DHCP protocol, do the following:
1
On the Main Menu, click SETUP.
2
On the left panel, click Network. The TCP/IP screen appears.
3
On Type, select DHCP.
4
Specify the Media Port, Web Port and DNS2 (if necessary).