KGUARD Security TC801 - Manual (Page 47)

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
47
3
Enable Email.
4
On Receiver, type your e-mail account to receive the e-mail setup confirmation and the cloud storage activation
link.
5
On Sender, type your e-mail account.
Note:
The Receiver and Sender can be the same e-mail account.
6
On Sender PWD, type your e-mail password.
7
Specify SSL, SMTP Port, and SMTP Server of your e-mail account.
Note:
Obtain these information from your e-mail service provider.
8
After all settings are complete, click Apply.
9
When data saving is complete, click OK.
« TIP »
If you want to test the e-mail settings, click Test. A test email will be sent to the Receiver e-mail account.
10
Click Exit to close EMAIL SETUP and return to CLOUD STORAGE screen.
11
Activate the cloud storage (see below).
4.5.3 Activate Cloud Storage
Every time the cloud storage account is changed, you must activate the account again to recognize the changes.
1
On the CLOUD STORAGE screen, click Activate Cloud. An activation e-mail will be sent to the Receiver e-mail
account. Follow the instructions in the e-mail to complete the cloud account activation
2
Click Apply.
3
When data saving is complete, click OK.
Note:
An e-mail will be sent to the Receiver e-mail account after clicking Activate Cloud. You must check your e-mail and
follow the link to complete cloud storage activation within 3 minutes.