KERN & SOHN AET 200-4NM - Manual (Page 92)

92 AET_/PET_/ILT_NM-BA-e-1410
22.1. Setting of keys and workspace for Statistics mode
When carrying out a series of measurements, bear in mind below data on
operation of keys:
 Pressing < PRINT> key causes releasing a printout and adding
a measurement to statistics,
 Pressing < Add to statistics> key causes ONLY adding a
measurement to statistics without releasing a printout.
As in any other working mode, balance user can define custom set of quick
access keys and data displayed in the grey coloured workspace.
Procedure:
1. Press grey coloured workspace,
2. The display indicates menu of: Settings, Keys, Information, Printout and
Profile,
3. Press or key,
4. Assign keys to displayed quick access keys, and select information that
is displayed in the grey coloured workspace,
22.2. Additional settings of Statistics mode
The additional settings enable adjusting the working mode to user’s needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. Press key,
3. The display indicates functions related to checkweighing, such as:
− Result control
− Tare mode
− Automatic footer printout
− Printout mode / Value release
− Printout
Means of using the above functions are given in point 10.8. “Additional
parameters on weighing process”.