KERN & SOHN AET 200-4NM - Manual (Page 129)

AET_/PET_/ILT_NM-BA-e-1410 129
List of parameters defined for a product:
1. Name
2. Description
3. Product code
4. EAN code
5. Mass [unit mass of a product]
6. Dosing power [enabled only in mode, and
determined in [%] from 0% to 100 %. It is operation
power of the automatic feeder PA-02/H.
The value of dosing power has to determined by tests
dependent on size, shape and mass of dispensed parts
(pills)]
7. Min [Minimal mass for weighing the product using result
control thresholds – LO. Value of error in
working mode determined as percent
of the nominal mass]
8. Max [Maximal mass for weighing the product using result
control thresholds – HI. Value of error in
working mode determined as percent
of the nominal mass]
9. Tolerance [% value calculated in relation to mass (5), denoting
measuring area in which the measurement is
recognized as correct.
10. Tare [product’s tare value, set automatically on selecting a
product from the database]
11. Price [Unit price of a product]
12. Density [product’s density, used for compensating air
buoyancy, as sample density] - [g/cm 3 ]
13. Shelf-life time in days
14. Date [Set product’s date (constant)]
15. VAT [VAT value related to a product]
16. Ingredients [Editing field for inserting names of ingredients used
for preparing a product, e.g. if a product is a mixture,
or if a product requires additional description of its
features or application]
17. Printout [printing a template assigned to a product]
CAUTION:
Remember to assign products to corresponding functions, as some of data
values is attributed according to their modes, e.g. thresholds in
mode are set in [g], while thresholds in
mode are set in [pcs]. The values are selected automatically depending on
which mode is enabled while entering a database.