KERN & SOHN AET 200-4NM - Manual (Page 75)

AET_/PET_/ILT_NM-BA-e-1410 75
o
Assign density to a product: YES/NO – if option is
selected, the software automatically assigns the value of
determined density of solid or liquid to field in a
product record of the database of products. To use this function,
before starting the density determining process, using database of
product select a product for which the density procedure is carried
out (if density has already been determined for this product, it is
replaced with new value),
o
Tare mode,
o
Printout mode / Value release,
o
Printout
Means of using the above functions are given in point 9.7 “Additional
parameters on weighing process”.
19.5. Printouts
Option Printouts enables setting the contents of printouts in a standard
printout and also determining non-standard printouts.

Standard printout
comprises four internal blocks, each featuring different variables. Each
variable can be attributed with parameter YES – i.e. present on a
printout, or NO – i.e. not printed.
Settings for header printout, weighing printout, and footer printout are specified in
point. 15.5; below description refers to setting a printout template from density mode.
A user can design content of a report for each of carried out procedures. On
pressing option a window is opened enabling setting
the content of each report.