KERN & SOHN AET 200-4NM - Manual (Page 23)

AET_/PET_/ILT_NM-BA-e-1410 23
* - Accessibility of measuring units is conditioned by type of balance and its
verification status.
In non-verified balances all measuring units including those outside the
International System of Units are available.
9.2. Means of correct weighing procedure
In order to ensure long lasting use of a balance, correct and reliable
measurement of weighed loads, follow below procedures:
 Start the balance with no load on the weighing pan
 (permissible value of load on the weighing pan on balance start is
±10% of its maximal capacity).

Load balance’s weighing pan steadily with no shocks:
YES NO
 Place weighed loads centrally on the weighing pan:
YES NO
 Avoid side loading, in particular side shocks:
NO NO