KERN & SOHN AET 200-4NM - Manual (Page 150)

150 AET_/PET_/ILT_NM-BA-e-1410
29.6. Ambient conditions module
A balance enables connecting an ambient conditions module THB series using
ports COM 1 or COM 2.
Ensuring correct cooperation between the balance and the ambient conditions
module requires entering module connection address and the baud rate of port
to which the THB module is plugged.
(address and baud rate settings are specified on module data plate).
29.7. Tablet feeder (automatic feeder)
(
mode not available in balance’s standard version)
Balance enables communicating it with an automatic feeder PA-02/H series
using ports:
• RS 232 (COM1),
• RS 232 (COM2),
• Com internal.
Ensuring a correct cooperation with the feeder requires setting an appropriate
address of the device (the address is specified on the data plate of the automatic
feeder, including baud rate parameters).