KERN & SOHN AET 200-4NM - Manual (Page 60)

60 AET_/PET_/ILT_NM-BA-e-1410
15.9. Dosing function in parts counting mode
Parts counting process can be aided by dosing function, i.e. control whether
indication does not exceed set target value.
Dosing requires setting a value, which is the target, for instance 100 parts,
and percent tolerance from the target value. The target value is displayed as a
bracket on a bargraph.
Defining the value of target mass is carried out using a quick access key
< Target Value>.
Procedure
•
Press grey coloured workspace and press option
•
Set Bargraph option to YES, return to parts counting mode
•
Press grey coloured workspace and press option
•
Assign option to one of the quick access keys displayed in
the bottom bar
•
Return to parts counting mode
•
Press < Target Value > key and insert number of parts recognized as
the target value,
•
If tolerance applies, set its value (range between 0 – 100%)
•
Under the measurement result there is bargraph displayed, containing:
o
Current number of parts on the weighing pan. The value of Target Mass
(black marker)
Caution:
The checkweighing and dosing functions can operate simultaneously in the parts
counting mode. In such case the dosing tolerance is controlled by Lo and Hi
thresholds of the checkweighing function.