KERN & SOHN AET 200-4NM - Manual (Page 108)

108 AET_/PET_/ILT_NM-BA-e-1410
Weighing A
On selecting an option, the balance
moves to the first sample on the list, for
which weighing is still to be carried
out. If there are no such samples in a
series, the balance displays a message
that such process is inaccessible.
If such process is possible, then new
data on initiated process is displayed in
the grey coloured workspace. During
process course the bottom bar and the
workspace display data on the following
steps that a user should follow.
Place a sample on balance’s weighing
pan and press <
> key.
On pressing the above key, a window is
displayed for inserting ambient
temperature and humidity value – if
option is set to
, or the data on ambient
conditions is automatically acquired from
the ambient conditions module and
displayed for confirmation – if option
is set to
.
Caution:
If option in the
working mode is disabled – set to ,
the software skips this part of the
process.
On accepting the ambient conditions by
pressing <
> key, the software
returns to the mode’s main window and
displays a command on unloading the
sample from the weighing pan
(displayed in the message bar).